Auotatic 19 Liter Barrel Drink Water Washing Filling and Capping Three in One Machine

Auotatic 19 liter barrel drink water washing filling and capping three in one machine
QGF-300 automatic washing filling and sealing machine according to its function, structure, control mode, divided into flushing parts, filling the gland part of the transport part and the barrel part.


    The machine frame is made of stainless steel wire drawing square pipe, with high strength, good rigidity, light weight, beautiful appearance, easy to clean and so on.
    The chain is composed of the main and passive sprockets, chains, barrels, brackets and so on. The chains and sprockets have been carefully designed to make it more scientific and perfect.

    The main drive drives the sprocket shaft by the geared motor and four inductive spindles are mounted on the sprocket. The position of each induction column is divided equally by the number of teeth to ensure the accurate positioning of the whole automatic operation. The machine flushing pipeline is made of stainless steel pipe connection, the nozzle nozzle technology companies use spray, bottle washing effect is good, do not stay dead, easy to disassemble and clean. Equipment to enhance the use of spray nozzles to ensure that the spray-free dead. A bucket with no barrel washing function.
    There are three hot water tank that is hot alkaline solution, disinfectant tank, a return water tank. Each tank is equipped with a plus funnel and doubles as a filter, the tank is equipped with hand holes, from the hand hole to clean the tank. The funnel is provided with a layer of 100 mesh drain, the funnel cover is open, can monitor the water level inside the tank. Water tank with overflow, when the water is too much, you can overflow through the overflow.
     On the barrel with automatic barrel, through the cylinder to achieve. The bucket bucket can be connected to the bucket at the falling position of the bucket, so that the bucket can be stably dropped. Then the bucket barrel is pushed by the inclined cylinder at 45 ° to the bucket mouth, and the filling valve is filled down by the cylinder.
    The host at the top of a special exhaust hood device, through the (exhaust system) will be discharged to the harmful odor outside, to reduce odor within the filling room, beneficial to human health.
Filling the end of the barrel through the conveyor chain to the gland. Filling and capping station has filling valve, water pipe, cover device, cover box, gland plate and other components.
Filling valve to reach the filling valve in the barrel, the filling cylinder action, and start filling valve for filling. When the bucket filled, the filling valve action, filling cylinder back, barrel before the line. The equipment used in the filling valve, designed with inlet and outlet two interfaces. When the barrel of water to a certain height, the filling valve action, stop filling. Filling time can be adjusted. High-sensitivity filling level PLC time regulation, quantitative accurate fast filling. The use of perfusion is completed first close the water solenoid valve, and then filling the valve lift configuration, to avoid the conventional filling valve when the spray phenomenon.
      Covering device is mainly composed of a motor rotating disc, a lower cover pipe, a hopper, etc. The function of the cover is to drive the cap inside the hopper into the lower cover pipe through the rotation of its motor disc and to enter the lower cover tube through the specific mechanism. The caps in the caps are aligned downward and arranged in a specific order.
The cover unit is covered by the cap manager and then slid onto the cover to cover the barrel. Dai Li force determined by the spring force, as long as the adjustment of spring compression bolt to adjust the wearing force. Adjust the spring center of the lever to adjust the height of the cover position.
Gland part of the drum to reach the gland station when the pressure gland cylinder cover.
The host does not set the finished product water tank, but by the water treatment equipment, the terminal system is equipped with filling pump and cleaning pump, respectively, through two pipes and barrel filling machine and cleaning reserve mouth connection to ensure that sterile water is always finished in closed conditions Under the filling, to avoid the water tank in the host set up the finished product generated secondary pollution phenomenon.


The technical parameters: